Product description:
33 mm Swirl Flap Blanking Plates for BMW (1 item)
Made precisely the highest quality materials with O-ring
From -50 ° C to + 225 ° C.
High resistance to oil and air pressure. Increased resistance to the devastating effects of oil. Non-flammable, resistant to ozone and ultraviolet rays.
Avoid a very expensive engine repair, if the piston will meet with the flap vortex.
The flaps are located in the intake manifold of the engine, the problem lies in the structure of vortex flaps mounted in the intake manifold. Slippers are not resistant to soot that is produced during the exhaust gas recirculation. Carbon black settles on the tabs until they are frozen.
These flaps are intended to improve the combustion of the air fuel mixture in the engine at low speeds. Flip turn a blind is leading to less air chamber. Builders meant to limit the combustion of nitrogen from air to avoid the formation of compound NO2. All this to meet the emission norms.
Mounting caps does not cause any errors operation of the engine, because this system is controlled by the vacuum in the intake manifold and has no connection with the electrics and electronics of the vehicle.
Blanks 33mm application:
3 E90 330D + XD all models
335D all models
3 LCI E90 335D all models
3 E91 330D + XD all models
335D all models
3 LCI E91 335D all models
3 E92 330D + XD all models
335D all models
3 E93 330D all models
3 E60 525D all models
530D M57N all models
530D M57N2 all models
530XD all models
535D all models
5 E60 LCI 530D + XD all models
535D all models
5 E61 525D all models
530D M57N all models
530D M57N2 all models
530XD all models
535D all models
5 E61 LCI 530D + XD all models
535D all models
6 LCI E63 635D all models
6 LCI E64 635D all models
E83 X3 3.0D M57N + M57N2 all models
E83 LCI X3 3.0D + SD All models
E53 X5 3.0D M57N 218km from the DPF 10 / 03-
X5 E70 3.0sd all models
X6 E71 3.5DX all models