33 mm Swirl Flap Blanking Plates Kit with Intake Manifold Gasket for BMW (6 items)

£35.00

Product description:

33 mm Swirl Flap Blanking Plates Kit with Intake Manifold Gasket for BMW (6 items)

Made precisely the highest quality materials with O-ring
From -50 ° C to + 225 ° C.

High resistance to oil and air pressure. Increased resistance to the devastating effects of oil. Non-flammable, resistant to ozone and ultraviolet rays.

Avoid a very expensive engine repair, if the piston will meet with the flap vortex.

The flaps are located in the intake manifold of the engine, the problem lies in the structure of vortex flaps mounted in the intake manifold. Slippers are not resistant to soot that is produced during the exhaust gas recirculation. Carbon black settles on the tabs until they are frozen.

These flaps are intended to improve the combustion of the air fuel mixture in the engine at low speeds. Flip turn a blind is leading to less air chamber. Builders meant to limit the combustion of nitrogen from air to avoid the formation of compound NO2. All this to meet the emission norms.

Mounting caps does not cause any errors operation of the engine, because this system is controlled by the vacuum in the intake manifold and has no connection with the electrics and electronics of the vehicle.


Set contains:

EGR valve gasket VICTOR REINZ - 1 piece

Gasket intake manifold round VICTOR REINZ - 6 pieces

Gasket intake manifold rectangular VICTOR REINZ - 6 pieces

Cover flap vortex diameter of 33mm with O-ring - 6pcs.


Blanks 33mm applicable to:

3 E90 330D + XD

335D

3 335D E90 LCI

3 E91 330D + XD

335D

3 335D E91 LCI

3 E92 330D + XD

335D

3 E93 330D

3 E60 525D

530D M57N

530D M57N2

530XD

535D

5 E60 LCI 530D + XD

535D

5 E61 525D

530D M57N

530D M57N2

530XD

535D

5 E61 LCI 530D + XD

535D

6 E63 LCI 635D

6 E64 LCI 635D

E83 X3 3.0D M57N + M57N2

E83 LCI X3 3.0D + SD

E53 X5 3.0D M57N 218km 10 / 2003-

X5 E70 3.0sd
 
X6 E71 3.5DX